- Harvard Peristaltic Pump P-70
The Harvard Peristaltic Pump P-70 offers unparalleled accuracy, reproducibility, and ease of use. P-70 drive provides flow rates from 0.001 to 70 ml/min
The Harvard Peristaltic Pump consists of a control unit, a motor drive, a tubing cassette and some sample tubing.
Other benefits include:
- The ability to separate the motor drive from the controller to facilitate use and save space in incubators and fume hoods
- A library of tubing sizes is stored in the pump’s memory minimizing set up time
- Custom tubing can be used allowing complete flexibility
- A full range of interchangeable motor drives to allow for economical ease of use over a broad flow rate range.
A complete range of programmable functions allow the pump to be easily adapted to a wide range of dispensing applications. The pump has pre-programmed flow profiles for:
- Constant Flow
- Flow Ramps
- Pulsatile Flow
- Concentration Based Fluid Delivery
- REGLO Analog Peristaltic Pump
The REGLO Analog Peristaltic Pump has a variable speed drive with start/stop, speed, and direction functions. This analog pump is available in either 2 or 4 channel versions and uses MS/CS Click ‘n’ Go Cassettes with 3-Stop Collared Tubing. In addition to the overload indicator and the analog interface, the Reglo Analog is suitable for continuous operation.
- REGLO Digital Peristaltic Pump
REGLO Digital Programmable Peristaltic Pumps offer versatile dispensing functions and provide reproducible, accurate results and take up very little bench-space. They are available in either 2 or 4 channels and with either 6, 8, or 12 pump rollers.
This pump features a dispense mode with variable flow rates and also dispenses by volume or time intervals. The digital readout facilitates programming and the snap-on MS/CA Click ‘n’ Go Cassettes makes this pump very easy to use.
- Ecoline Microprocessor Controlled Pump
The VC-280 and VC-380 pumps feature exchangeable rotors with either 2 or 3 rollers providing lower pulsation, higher flow rates or elevated differential pressures. These pumps are supplied with the rotor that accepts 1.6 mm ID tubing. One pump is supplied with the 2 roller rotor and the other is supplied with the 3 rotor roller. They both have a safety cutout feature that stops the rotation of the rotor when the rotor cover is opened. Using standard tubing they provide flow rate ranges from 1.6 to 5,000 ml/minute with a differential pressure of 1.5 bar (22 PSI)*.
- MCP Pump Drive
Dispense by speed (rpm), volume (ml), time (0.1 seconds to 999 hours), flow rate (ml/min) or interval.This programmable pump drive offers various dispensing modes, providing highly reproducible and accurate results.
- BVP Pump Drive
The BVP pump drive is very robust and designed for continuous operation. It can be combined with a wide selection of pump-heads. It is equipped with a 3 digit potentiometer speed selector and an analog interface.
- SB Pump Head Tube Bed with Tube Bed Sets, 2 V or 3 V
The SB Pump head is suitable for use with the MCP and BVP pump drives. The SB Pump head is a single pump head that uses interchangeable two or three channel tube bed sets. Simply insert the tube bed set, rotate, and the pump is ready to use.
Tube sets sold separately.
- Centrifugal Pump
The centrifugal pump is specifically designed for pumping blood and/or erythrocyte suspension solutions in the physiological or pharmacological laboratory. It consists of the pump drive BVP-ZX and a centrifugal pump head which can be replaced without tools. Pump heads are hermetically sealed. The coupling to the motor of the pump drive is carried out via magnetic force; there is no axle.
